Furthermore, the Riber Standard 290 iSUP has a drop stitch construction. The term drop stitch refers to the thousands of tiny fibres that go between the top and bottom layers of the reinforced PVC layers.This fortified inner body allows for a high pressure inflation of around 15-18 PSI. Encasing the 500 denier drop stitch is a top and bottom layer of 0.5mm 1000 denier polyester plain weave laminate. Consequently, this makes the hull extra strong and adds stiffness. The Riber Standard 290 iSUP has two layers of glued high density PVC to increase the rigidity and strengthen the skin of the iSUP. It also has a UV protected graphic print. The Riber Standard 290 iSUP has a heat embossed 3mm thick EVA deck to provide maximum traction and durability. Additionally the high pressure valve creates an airtight seal from dust and water. It boasts a lockable deflation setting making stowing away even more quick and easy. WHO IS THE RIBER STANDARD 290 ISUP FOR? Designed for riders wanting low volume and weight, the Riber Standard 290 iSUP has a classic pintail shape to guarantee performance and speed.
As a result, the size of the board means its easy to turn and manoeuvre. Additionally a tri-fin cluster, with a large removable fin, gives further drive and tracking in almost any water state.Likewise, this also aids to increase the manoeuvrability of the Riber Standard 290 iSUP. Above all this is an ideal entry level product suitable for everything from flat water cruising on rivers and lakes, to touring and surfing small waves in the sea. The Riber Standard 290 iSUP comes complete with a shoulder strap, instruction booklet, repair kit and dual action pump.
The included stirrup hand pump has an integrated pressure gauge and can be switched between single and double action. When you start to get close to the high inflation pressure you can swap to single action making it easier to do. In addition to this the pump also has a deflation side to it making sure it will always store away easily. This iSUP is fully CE approved and tested to British Standard BS EN 15649-1:2009+A2:2013 and BS EN 15649-7:2009.
Creates an airtight seal from dust and water, the lockable deflation valve makes stowing away quick and easy. Heat pressed laminated PVC rail.
Creates the ultimate airtight and waterproof seal. Twin layer rails with 0.5mm 500 denier polyester. Plain weave laminate secures 100% air tightness, these are covered by robust bi-axial 0.7mm 1000 denier polyester mesh for additional stiffness. Heat embossed 3mm thick EVA. Deck provides maximum traction and durability.
Is a top and bottom layer of 1000 denier polyester plain weave laminate, which makes the hull extra strong and adds to stiffness. Creates a fortified inner body allowing for high pressure inflation. Two layers of Glued high density PVC. Stiffens and strengthens the skin with UV protected print. The item "9.5ft iSUP Inflatable Stand Up Paddle Board with Accessories Orange Riber" is in sale since Friday, December 1, 2017.
This item is in the category "Sporting Goods\Surfing\Surfboards". The seller is "shopckd" and is located in Chesterfield.
This item can be shipped to United Kingdom.